TP-Link Pharos CPE710 High-Gain Outdoor Wireless Bridge

The TP-Link Pharos CPE710 delivers professional-grade wireless connectivity for outdoor point-to-point and point-to-multipoint applications. Equipped with a 23dBi high-gain Cassegrain directional antenna and dedicated metal reflector, this outdoor CPE achieves transmission distances up to 5 kilometers with exceptional beam directivity and noise immunity.

AC867 Wireless Performance

Powered by 802.11ac technology with 256-QAM modulation and 80MHz channel width, the CPE710 reaches speeds up to 867Mbps—three times faster than 802.11n standards. The Qualcomm 750MHz processor with 128MB DDR2 RAM ensures stable performance for bandwidth-intensive applications including wireless backhaul, building-to-building connectivity, and network infrastructure extensions.

IP65 Weatherproof Construction

Built with outdoor PC stabilized plastic housing, the CPE710 meets IP65 water and dust protection standards. The enclosure withstands harsh environmental conditions while the integrated 15kV ESD and 6kV lightning protection safeguard against electrical surges. The narrow 9° azimuth and 7° elevation beamwidth minimize interference and maximize signal focus over long distances.

Pharos Control Centralized Management

Manage multiple CPE710 units from a single interface using Pharos Control software. The system provides device discovery, real-time status monitoring, firmware upgrades, and network maintenance tools. The web-based PharOS interface offers advanced configurations including bandwidth control, VLAN tagging, spectrum analysis, and antenna alignment tools for precise installation.

Flexible Deployment Options

The gigabit Ethernet port with passive PoE support (16-27V DC) enables simple installation with a single cable for both data and power. The included 24V 0.6A PoE adapter supports cable runs up to 60 meters. WDS bridging, multiple SSID support, and configurable transmit power (up to 27dBm) provide versatility for various network topologies.

Technical Specifications

HARDWARE FEATURES
Processor:
Qualcomm 750MHz CPU, MIPS 74Kc

Memory:
128 MB DDR2 RAM, 16 MB Flash

Interface:
1 10/100/1000 Mbps Shielded Ethernet Port (LAN/POE)
1 Reset Button

Power Supply:
Passive Power over Ethernet via LAN (+4,5pins; -7,8pins)
Voltage range: 16-27V DC

Dimensions ( W x D x H ):
366 x 280 x 207 mm (14.4 x 11.0 x 8.1 in.)

Antenna Gain:
23 dBi

Antenna Beamwidth:
9° (Azimuth)/7° (Elevation)

Protection:
15 KV ESD Protection
6 KV Lightning Protection

Enclosure:
Material: Outdoor PC stabilized plastic
Weatherproof: IP65 water and dust proof design

WIRELESS FEATURES
Wireless Standards:
IEEE 802.11a/n/ac

Wireless Speeds:
Up to 867 Mbps (80 MHz, Dynamic)
Up to 400 Mbps (40 MHz, Dynamic)
Up to 173.4 Mbps (20 MHz, Dynamic)

Frequency:
5.15–5.85 GHz

Transmit Power:
Max. 27 dBm (Adjustable power by 1dBm)

SOFTWARE FEATURES
Network Configuration:
WAN: Static/ Dynamic/ PPPoE
LAN: Static/ Dynamic/ DHCP
Forwarding: ALG/ UPnP/ Virtual Server/ Port Trigger
Security: SPI Firewall/ Ping Forbidden/ DoS Protection
Access Control
Static Routing
Bandwidth Control
IP & MAC Binding

Wireless Configurations:
Selectable Channel Width: 20/40/80MHz
Auto Channel Selection
Transmit Power Control
Dynamic Frequency Selection(DFS)
WDS Enable/ Disable
Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption,
SSID Broadcast Enable/ Disable
Multi-SSID with VLAN Tagging(AP Mode only)
Distance/ ACK Timeout Setting
Wireless MAC Address Filter
Wireless Advanced:
Beacon Interval/ RTS Threshold/ Fragmentation Threshold/ DTIM Interval/ AP Isolation/ Short GI/ Wi-Fi Multimedia
Long Range PtP

Management:
Discovery and Remote Management via Pharos Control application
HTTP/ HTTPS Web-based management
System log
SNMP Agent(v2c)
Ping Watch Dog
Dynamic DDNS
SSH Server

System Tools:
Indicators:Signal Strength/ Noise/ Transmit CCQ/ CPU/ Memory
Monitors: Throughput/ Stations/ Interfaces/ ARP/ Routes/ WAN/ DHCP
Spectrum Analyzer
Speed Test
Ping
Traceroute
Antenna Alignment

System-level Optimizations:
Optimized IGMP Snooping / Proxy for multicast applications

POE ADAPTER FEATURES
Dimensions (W x D x H):
85.8x43.9x29.7 mm

Interfaces:
1 AC Jack with Earth Ground
1x 10/100/1000 Mbps Shielded Ethernet Port (Power + Data)
1x 10/100/1000 Mbps Shielded Ethernet Port (Data)

Button:
Remote Reset Button

Power Status LEDs:
Green

Input:
100-240VAC, 50/60Hz

Output:
24VDC, 0.6A Max
+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)

Efficiency:
>84.29%

Certifications:
CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark

OTHERS
Certification:
CE, FCC, RoHS, IP65, IC

Package Contents:
Outdoor Wireless CPE
24V 0.5A Passive PoE Adapter
Pole Mounting Kits
AC Power Cord
Installation Guide

System Requirements:
Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.

• Type: CPE
• Speed:
• PoE: No